Géiser Solar De Baja Presión CrestSolar

CrestSolarSKU: SOLC125
2 reseñas

Tamaño: 125ℓ
Precio:
Precio de ventaR 6,778.26

Impuestos incluidos Gastos de envío calculados en la caja

Stock:
Disponible

Retiro disponible en Archies Hardware

Normalmente está listo en 1 hora

Patente nº 2012/06170

SOLAWATER125NP BAJA PRESIÓN

CARACTERÍSTICAS DEL PRODUCTO

  • Agua de 125 litros: se puede utilizar con agua de cualquier calidad.
  • Calienta el agua hasta un máximo de 59°C, a diferencia de las versiones chinas, que hierve todo el día.
  • Proporcionar agua caliente el 80% del tiempo sin el uso de electricidad.
  • Contenido local 100% sudafricano
  • Fabricación local
  • Antirrobo
  • Tanque de HDPE libre de corrosión
  • Colector de HDPE a prueba de granizo y heladas
  • Resistente a los rayos UV
  • Precio correcto
  • Sencillo y sensato:
  • Instalado plano sobre el tejado repartiendo los puntos de presión en la estructura del tejado.
  • Exposición limitada a tormentas.
  • Efectivo y eficiente
  • Montaje fácil y rentable
  • Instalación simplificada y sensata

DATOS TÉCNICOS

  • Longitud del colector 1500 mm
  • Conexiones de fontanería 22mm
  • Ancho del colector 1200 mm
  • Ancho exterior de los tanques 1100 mm
  • Material del colector: Polietileno
  • Presión de trabajo: 0 Kpa
  • Absorción: 95%
  • Soporte: Galvanizado
  • Emitancia: 5%
  • Marco de inclinación: Techo plano - Techo de 12 grados
  • Material interno del tanque: polietileno
  • Pérdida de calor: 11%
  • Aislamiento: Poliuretano de 50 mm.
  • Apertura del colector: 1,8 m²
  • Material exterior del tanque: polietileno
  • Capacidad nominal: 125 litros
  • Factor Q de SABS: 14,3Mj

Manual de instalación

Contenido

  • 1x Caja Géiser (solawater125NP)(130x48x60cm)
  • 1x Caja Colector solar (solawaterPFP1.8)(160x134x8cm)
  • 1x Tanque Capilar (tanque cisterna)(30x34x28cm)

Garantía 1 año todo el año

También te puede interesar

Visto recientemente

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
J
John Hall
Inlet valve non functional. Mounting brackets dangerously inadequate

Installing this unit has become a nightmare on my slanted roof. The two thin mounting (retaining) brackets supplied are totally inadequate to support the filled geyser (100 liters plus unit = 130kg?) Causing the supplied screws to rip out of the plastic body. Additionally the supplied inlet valve isn't designed to function at the angle of the roof. It doesn't fill the reservoir due to the inadequate float closing prematurely. It's a nightmare to perch high up a severely slanted roof, trying to get a malfunctioning valve to work. Bleeding the system is also cumbersome as the tank is completely sealed, thus not allowing air out. The outlet fitting must be removed to allow air out. What is going to happen if the water reaches boiling point? Other solar geysers have a breather to accommodate boiling water. So far, so bad. I am seriously doubting this purchase. The idea is good. But the actual mechanics are doubtful.

&
'Daniel
Np125 Crest Geyser

Fantastic product, will last a life time , simple installation.